BE Comp. A (35.71 lb)
BE Resin Component A is the primary epoxy resin used in the BE epoxy system for CIPP trenchless pipe rehabilitation. This low-viscosity, styrene-free epoxy resin ensures excellent liner impregnation and consistent wet-out performance during trenchless installations.
The resin easily penetrates liner materials, allowing complete fiber saturation while maintaining a smooth and controlled wet-out process. When properly mixed with BE Resin Component B (hardener), the system forms a high-strength cured liner with excellent mechanical performance and chemical resistance.
The BE epoxy system is widely used for municipal sewer rehabilitation, industrial pipelines, and trenchless pipe repair projects, providing long-term durability and structural performance.
Available Pot Life Options
30 Minute Pot Life – 4hr Cure Time @77°F
60 Minute Pot Life – 12hr Cure Time @77°F
180 Minute Pot Life – 24hr Cure Time @77°F
Technical Specifications
Heat resistance:
Short-term ring stiffness (EN ISO 9969)
15.59 kN/m² (DN100 pipe, wall thickness 3.9 mm)
Durability / Service Life
50 years (at an average operating temperature of +15 ºC)
BE Epoxy Resin requires Part A resin and Part B hardener to be mixed together in the correct ratio. Part A is required for the chemical curing reaction — without Part A the epoxy will not cure.*
